| Alula |
| ELK |
| Fibaro |
| Omni |
| |
| Alula |
|
| Q: Does Alula interface with Smarthings ADT wireless sensors? |
| A: Unknown but Z-Wave sensors can be used for Automation rules (not security). |
| Q: How is the panel powered? |
| A: The panel comes with a wired transformer and a battery for backup. |
| Q: How does a dealer benefit from alarm monitoring? |
| A: Alula is setup as an RMR solution where you would pay for access and monitoring and then resell those services to your customers. |
| Q: What are the monthly fees? |
| A: Dealers may contact Worthington Distribution at 800.282.8864 to request pricing information. |
| |
| ELK |
|
| Q: Is there an end user software to allow customer to write their own rules? |
| A: ELKRP2 can be limited by user so that only certain options can be changed. |
| Q: Does the M1 support ZigBee? |
| A: Not at this time. |
| Q: Does the M1 integrate with URC? |
| A: Not at this time however this is being worked on. |
| Q: Does the M1 support Honeywell thermostats? |
| A: Honeywell Z-Wave thermostats are supported as well as the Lutron Radio RA2 thermostat which is made by Honeywell. |
| Q: Are Ecobee thermostats supported? |
| A: Not at this time. |
| Q: What thermostats does the M1 support? |
| A: The list of supported manufacturers products can be found here: https://www.elkproducts.com/m1-partner-manufacturers. |
| Q: Does the M1 integrate with GE Wireless? |
| A: Using the M1XRFEG receiver you can use 319.5 crystal sensors. |
| Q: What software is available for end users? |
| A: M1ToGo is available for Windows, ElkLink Mobile is available for iOS and Android, ekeypad M1 (and Pro) is available for iOS, and M1 Touch Pro is available for Android. |
| Q: Is DDNS (Port Forwarding) supported by the Apps? |
| A: Yes. |
| Q: Are multiple houses (panels) supported by the Apps? |
| A. Yes. M1 Touch Pro for Android and ekeypad Pro for iOS. |
| Q: How do you become an ELK dealer? |
| A: Contact Worthington Distribution at 800.282.8864 to start purchasing ELK products. |
| Q: How does billing work on the C1M1? |
| A: Billing is handled through Telguard. |
| Q: Are other brand cellular communicators supported? |
| A: Yes. Dialers from Alula (IP Data Tel), Uplink, and more are supported by using the telephone connection. |
| Q: Does the M1 support remote expansion? |
| A: Yes. Modules can be installed anywhere within the 4000 foot bus limit. |
| Q: What is the max number of inputs and outputs supported? |
| A: Up to 208 inputs (144 max wireless) and 205 outputs. |
| Q: Is Leviton Vizia RF Z-Wave supported? |
| A: The M1 supports Z-Wave devices such as lights, locks and thermostats via the Leviton VRC0P and the M1XSLZW expander. |
| Q: Does the M1 support X-10 and Lightolier Compose? |
| A: Yes. X-10 is supported using the PSC05 (TW523). |
| Q: Is Lutron Radio RA2 supported? |
| A: Yes. Lutron Radio RA2 is supported as well as RA2 Select and Caseta. |
| Q: Will the M1 support Leviton HLC lighting? |
| A: Yes. HLC is UPB based so it will work with the M1PCSPIM. |
| Q: Are there any supported video door stations? |
| A: Video support is handled via the indiviual apps (ekeypad PRO for iOS and M1 Touch Pro for Android). |
| Q: Are the KP2 keypads the same cutout as the Omni keypads? |
| A: No. The KP2 keypads are 4.75H x 3.75W and the Omni keypads are 4.75H x 4.75W. |
| Q: Is voice control available for the M1 system? |
| A: Not directly. The M1 must be integrated with a HomeSeer controller (and supported plug-in) to support both Amazon Alexa and Google Home. Contact Worthington for more information. |
| Q: What audio systems does the M1 integrate with? |
| A: Russound, Nuno, and others. Please see the list of supported manufacturers at https://www.elkproducts.com/m1-partner-manufacturers. |
| Q: Does the M1 support the Leviton HiFi2 audio system? |
| A: Not at this time. |
| Q: Do voice announcements come over the keypad bus? |
| A: No. An additional speaker (and wire) is required for voice announcements. |
| Q: Can we re-use Omni access control components with an M1? |
| A: You can re-use the door strikes but that is all. |
| Q: Is there a wireless keypad available for retrofit applications? |
| A. No. You would need to use a smartphone or tablet. |
| Q: Does the M1 support 4-wire smoke detectors and heat detectors? |
A: Yes. Any zone can be |
| Q: Does the M1 support 2-Wire smokes? |
| A: Yes. Up to nine(9) 2-wire smokes are supported on zone 16 only. |
| Q: How does the programming capacity compared to Omni? |
| A: Programming capacity is measured differently in the M1 (percentage based) versus the Omni (number of lines). The M1 is somewhere between the Omni IIe and Pro II in capacity. |
| Q: Does the rules engine support OR? |
| A: Not at this time. |
| Q: How are firmware updates handled? |
| A: Firmware is updated via RP2 programming software. |
| Q: Is there similar functionality to the User Settings in the Omni available? |
| A: Yes. There are 20 Custom Settings that can be used. |
| Q: What is the M1 equivalent of Flags in the Omni? |
| A: Unused outputs can be used for tracking states the same way you would use Flags in the Omni. |
| Q: Are temperature sensors available? |
| A: Yes. There are two versions available which will cover most applications. |
| Q: How quickly does automation occur after the trigger? |
| A: The M1 uses a fast micro-processor so rules execute almost immediately. |
| Q: Are ELK products available via retail channels? |
| A: Yes. ELK enforces MAP pricing and monitors popular sites to make sure dealers and integrators are able to make a profit on product. |
| Q: Does the M1 require the use of a monitoring company? |
| A: No. The M1 can dial out as well as send emails and texts (M1XEP required) with the need for a monitoring company. |
| |
| Fibaro |
|
| Q: What is the range on the Fibaro sensors? |
| A: Typical indoor range with Z-Wave is approximately 30 feet for indoor use. |
| Q: Does Fibaro support Nest? |
| A: Nest thermostats and the video feed from the Nest Hello are supported at this time. |
| Q: Does Fibaro support wired sensors? |
| A: The Fibaro Implant will allow you to connect standard wired sensors to the system, however it is not shipping yet. |
| Q: Can you have multiple Swipes with different functions? |
| A: Yes, multiple Swipe controllers are supported with each being able to control different functions. |
| Q: Are Swipe controllers only compatible with Fibaro? |
| A: Other Z-Wave hub manufacturers may support the Swipe however you would have to contact them to verify support. |
| Q: How is the Swipe powered? |
| A: Swipe can be powered by USB or by 4x AA batteries. |
| Q: Does Fibaro integrate with Radio RA2? |
| A: Not at this time. |
| Q: Can Fibaro interface with the ELK M1? |
| A: There is not a plug-in available at this time. |
| Q: How is Fibaro tech support? |
| A: We have had good experiences with it. They are European based but with US hours. Worthington Distribution can answer most questions. |
| Q: Can you remote locate the Z-Wave external antenna? |
| A: The best way to extend Z-Wave range is by adding more devices or using multiple Home Center units. |
| Q: How many devices can the Fibaro system reliably handle? |
| A: The general rule with Z-Wave is 5-6K square feet and 150 devices. Multiple Home Center units can be used to create larger systems. |
| Q: Can you use multiple Home Center 2 controllers or only HC2 and Lite? |
| A: You must at least have 1 Home Center 2 controller in a multi-system scenario however the other controllers and be either HC2 or Lite? |
| Q: How does the Home Center 2 compare in price to the Omni? |
| A: A Home Center 2 is comparable in price to an Omni IIe. |
| Q: How is the battery life of Fibaro sensors? |
| A: Most sensors will last 2 years and have low-battery warnings. |
| Q: Can Fibaro sensors be hardwired for power to eliminate battery management? |
| A: Only the Swipe supports wired power. |
| Q: What cameras are compatible with Fibaro? |
| A: Fibaro supports a wide range of cameras. See https://compatibility.fibaro.com/ for a full list. |
| Q: Do Fibaro system support WiFi connection? |
| A: For reliability, Fibaro choose only to support wired Ethernet connections. |
| Q: Can security systems be tied into Fibaro? |
| A: Fibaro has a plug-in for DSC PowerSeries panels. |
| Q: Can Fibaro interface with Omni panels. |
| A: There is not a plug-in available at this time. |
| Q: Does Fibaro offer Automation similar to Omni? |
| A: Fibaro has a power rules engine that can handle multiple if-then statements. |
| |
| Omni |
|
| Q: Do the discontinuations affect Lumina as well? |
| A: Lumina RF is still available. Luminia panels have been discontinued for some time now. |
| Q: What are alternatives to HLC? |
| A: PCS devices will work on an Omni system however they must be programmed with UpStart. |
| Q: Is the entire Omni line being discontinued? |
| A: At this time, only HLC, Omni wireless, the white OT7, the console flush kit, and serial connectivity cable are discontinued. |
| Q: Who should we contact regarding transitioning from Omni? |
| A: Any member of the Worthington staff can answer your questions or get you to one of the techs from the presentation. |
Warning: I am able to write to the configuration file: /home/jr18gym493fo/public_html/university/catalog/includes/configure.php. This is a potential security risk - please set the right user permissions on this file.
